Securing an original yoke patti (steering stem bearing race) for an old model TVS Jupiter might be a bit of a hunt. Your first point of contact should be authorized TVS dealerships, particularly those with a long-established presence in your area. They might have the part in stock or could potentially locate one through their network. Online retailers that specialize in genuine TVS scooter parts are another avenue to explore. Make sure to specify your Jupiter 's exact model and year when searching or inquiring. Due to the age of the scooter, there's a possibility that the original part has been discontinued. In that case, you'll likely need to consider a high-quality aftermarket yoke patti from a reputable manufacturer, ensuring it's compatible with your specific Jupiter model. Checking with scooter salvage yards or online forums dedicated to older scooters could also yield results, as someone might have a used but serviceable original part available.

The availability of Servo engine oil for an old model TVS Jupiter depends on your location, as Servo is a brand primarily marketed in India by Indian Oil Corporation Limited (IOCL). If you're in India, you should be able to find Servo engine oil suitable for your Jupiter at IOCL petrol pumps, authorized distributors, and local auto parts stores. You'll need to select the correct viscosity grade as recommended in your Jupiter 's owner's manual, likely a 10W-30 or 20w40 that meets JASO MB specification for scooters. Servo 4T is commonly available, but always double-check the specifications to ensure it's the right fit for your specific model year. Outside of India, Servo engine oil will be much harder to find, and you'll likely need to use a more readily available international brand like Castrol, Shell, Mobil, or Motul, selecting an oil that matches your Jupiter 's required specifications.

Polishing an old TVS Jupiter model involves a meticulous process that restores the scooter's original shine while protecting it from further environmental damage. Over time, an Jupiter ’s paint and exterior surfaces can deteriorate due to prolonged exposure to sunlight, dust, moisture, and regular wear and tear. To begin the polishing process, the scooter must first be thoroughly washed using a mild automotive shampoo or a pH-neutral bike wash liquid. This step ensures that all dirt, grease, and accumulated grime are removed, allowing the polish to adhere properly to the surface. Once cleaned, the scooter should be dried using a microfiber towel or an air blower to prevent water spots from forming. The next step involves a careful inspection of the body panels, plastic trims, and metal components to identify any faded areas, oxidation, or scratches. If there are deep scratches or chipped paint, it may be necessary to use touch-up paint before proceeding with polishing.